ONWA®
COLOR LCD GPS PLOTTER SOUNDER
MODEL: KP-626/636
FEATURE:
1) High resolution TFT-LCD display
2) Built-in large memory electronic chart
3) High accuracy GPS receiver
4) Versatile display mode include
- Plotter screen
- Echo sounder screen
- Nav. Data
- Dual display (Plotter/Echo sounder)
- Satellite information
5) Quick chart drawing speed 6) Display of vessel tracks, waypoint and planned route on electronic chart
7) Choice of 50 KHz or 200 KHz 300W echo-sounder (KP-636)
8) Depth date display on plotter screen (KP-636)
9) 7 color targets presentation (KP-636)
10) Auto mode for hand-off operation (KP-636)
11) Use of an advanced processor
12) Low power consumption
SPECIFICATION
GPS Receiver Characteristics
1. Receiver type 12 discrete channels, C/A code all-in-view
2. Receive frequency L1 (1575.42 MHz)
3. Accuracy 10m approx. (95% of the time SA off)
4. Time to first fix 12 seconds typical (warm start)
5. Tracking velocity 900 Knots
Plotter Characteristics
1. Display 5.6” inch color TFT-LCD, daylight viewing, 320 × 240 pixels
2. Display modes Selectable from the followings:
- Full screen plotting mode
- Full screen steering mode
- Full Satellite information screen
- Full screen echo sounder mode (KP-636)
- Dual display mode (plotter + sounder) (KP-636)
3. Projection North-up Mercator
4. Landmass display Fill-in or outline, user-selectable
5. Lighthouse display Blinking, stationary or off
6. Map scale ranges 1/N type ranges: 1/2,000 ～ 1/25,000.000
NM type ranges: 0.1 ～ 1500 nm
7. Latitude limits Between 85°N and 85°S
8. Plot intervals 5s to 60 mins or 0.01 to 10nm
9. Memory capacity Up to 8,000 points for ship’s track and 4,000 waypoints
10. Voyage planning Waypoint navigation or route navigation
11. Boundaries 7 color groups each consisting of up to 200 points
12. Alarms Anchor watch, Arrival, Boundary, Cross track error
13. Data I/O NMEA-0183 version 2.0 and RTCM-104
24 hour hh : mm format. Time offset
14. UTC/Local Time Entered manually
Echo Sounder Characteristics (KP-636)
1. Presentation colors 7 colors selectable from analog colors
2. Display modes Selectable from the following:
- Full screen display
- Split screen with mid-water expansion
- Split screen with bottom expansion
A-scope display can be turned on/off with each of the above display
3. Frequency 50 KHz or 200 KHz (Specify when ordering)
4. Screen splitting modes Vertical (default) or horizontal (optional)
5. Basic range M: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000
FM: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000
BR: 2.5, 5, 10, 15, 20, 30, 40, 50, 80, 100, 150, 200, 300, 500, 1000
FT: 5, 10, 20, 30, 40, 60, 80, 100, 150, 200, 300, 500, 1000, 2000, 3000
6. Phasing (shift) 1 unit steps from 0 to 999
Meters/Fathoms/Braccia
7. Picture Advance Freeze, 1/16, 1/8, 1/4, 1/2, 1/1
8. Alarms Depth (Swallow and deep) and fish
9. Output power 300W RMS (2.4 KW PEP)
Environmental Conditions
Ambient temperature 0 to 45℃, 95% RH without condensation
Power Supply
1. Power requirements 11 to 40 VDC, current drain: 0.9 A at 12 V with on-screen readout of power source voltage
2. Battery Alarm Audible and Visual, presettable in 0.1 V steps
Equipment List (Standard)
1. Display unit
2. Antenna unit with 10m cable
3. Operator manual
4. Installation materials and standard spare parts
5. Bronze transducer (only for KP-636)
檢測認證人脈交流通訊錄
