SINEAX A230s
Multifunctional power monitor with system analysis.
Panel mounting, 96 x 96 mm.
The A230s is designed for application in high, medium and low voltage systems. Any current and voltage transformers are taken into account in the calculation of the measured values.
Accurate measured values:
U, I: 0.2% P, Q, S, PF, meter: 0.5% F: 0,02 Hz
4-quadrant measurement of all values in AC systems
Safe 3-way galvanic isolation between all circuits
2 outputs for pulse or limit values
4 meters for active power: Incoming/outgoing with high/low tariff*
4 meters for reactive power:
Inductive/capacitive or incoming/outgoing with high/low tariff*
All counter values, recorded values, and settings are kept on a power supply failure
System/application: Single-phase 3L balanced/unbalanced (Aron, Full), 4L balanced/unbalanced (Open-Y, Full)
Dimensions 144 x 144 x 46 mm
4-digit, 14 mm high LED display
The modules EMMOD20x extend the functionality of the power monitoring devices of the A series. Depending on the module different bus interfaces are supported, partly with additional data logger and digital inputs as well as pure analog output extensions.
The following modules are available:
EMMOD201
Switchable RS232/RS485 (Modbus) interface, data logger, digital input
EMMOD202
2 analog outputs
EMMOD203
Ethernet interface (Modbus/TCP, HTTP), data logger with timestamp, 2 digital inputs
EMMOD204
Profibus DP interface
檢測認證人脈交流通訊錄
