BIFMA認證簡稱BFM是對辦公椅,文件柜,長沙發,桌子,屏風等辦公家具提供測試服務,世界各國家具要進入美國,必須先拿到BIFMA等機構認證的國際標準準行證方能進入美國市場。因此,BIFMA在國際家具業對外貿易交往中起著重要的作用。 辦公家具的測試主要根據進口國的不同而執行相應的標準,如JIS、GB、ISO、BIFMA 等。總的說來,測試內容不外是一些穩定性、強度及疲勞性的考查,各國的測試項目也大同小異,但BIFMA標準以其完善的內容、嚴格的要求逐漸贏得了廣泛的認同。
ANSI/BIFMA X5.6-2003 panel Systems-tests屏風系統測試
Test Requirement檢測要求
1 Panel flammability test 防火測試
2 Stability test for panel systems products 穩定性測試
3 Mechanical strength test for panel systems products 機械強度測試
4 Panel glide assembly strength test 面板滑軌強度測試
5 Panel component static load tests 板狀構件強度測試
5.2 Work surface concentrated functional load test 工作臺面集中功能載荷測試
5.3 Horizontal surface distributed functional load test 水平臺面均布功能載荷測試
5.4 Horizontal surface concentrated proof laod tests 水平臺面集中破壞載荷測試
5.5 Horizontal surface concentrated proof load test 水平臺面均布破壞載荷測試
5.6 Transaction surface torsional load test 記錄臺面扭曲載荷測試
5.7 Functional load test for panel mounted storage units-static 儲存柜功能載荷測試
5.8 Proof load test for panel mounted storage units-static儲存柜破壞載荷測試
6 Lock tests-static 鎖測試
6.2 Test for extendible element locks 抽屜鎖測試
6.3 Force test for door locks 門鎖測試
7 Panel mounted component cyclic durability tests 屏風構件疲勞測試
7.2 Work surface durability (top load ease)test 工作臺面疲勞測試
7.3 Wear and fatigue test for hinged doors 帶鉸鏈的門疲勞測試
7.4 Dorp test for horizontally hinged doors-cyclic帶鉸鏈的門跌落測試
7.5 Wear and fatigue test for horizontal receding door 水平伸縮門疲勞測試
7.6 Wear and fatigue test for vertical receding door 垂直伸縮門疲勞測試
7.7 Sliding and roll-front door wear and fatigue test 滑動門和卷門疲勞測試
7.8 Slam test for sliding and roll-front doors which free-fall open or closed大力打開/關閉測試(滑動門和卷門,靠重力打開/關閉)
7.9 Slam open/closed test for sliding and roll-front doors that do not free-fall 大力打開/關閉測試(滑動門和卷門,不靠重力打開/關閉)
7.10 Slam open/closed test for vertically hinged doors 大力打開/關閉門測試(鉸鏈垂直安裝)
7.11 Door latch test 門插銷測試
7.12 Cycle test for extendible elements deeper than wide 抽屜疲勞測試(寬度小于深度)
7.13 Cycle test for extendible elements wide than deeper 抽屜疲勞測試(寬度大于深度)
7.14 Cycle test for center/pencil drawers 鉛筆盒疲勞測試
7.15 Out stop test 抽屜外擋塊測試
7.16 Rebound test 抽屜反彈測試
7.17 Locking mechanism cycles test for all locks 鎖機構疲勞測試
7.18 Adjustment tests for adjustable keyboard surfaces and input device supports 可調節鍵盤疲勞測試
7.19 Work surface vertical adjustment test 工作臺面垂直調節測試
7.20 Vertically or horizontally hinged sliding door out stop tests 滑動門外擋塊測試
8 Dislodgment test for panel-mounted components 抗搬運能力測試
9 Pull force test 抽屜拉力測試
Sample required: 2 sets of completed products with assembly instruction (if applicable) is
recommended.
樣品要求: 全套樣品2 套并包括安裝說明書(如適用).
Turnaround time: normal (15 working days), express (12 working days).
所需時間: 標準(15 個工作天), 加快(12 個工作天).
東莞標檢引入了一步容積達24立方米,目前國內最大且唯一滿足國際標準的全尺度(VOC)測試艙,可按照歐洲、美國、日本及中國等多個國家和地區的產品安全標準,對木制品、家具、人造板、建筑材料中甲醛及其他揮發性有機物含量進行測試,極大地滿足了東莞及珠三角廠商的測試需求.
如欲了解更多信息,請以下方式聯系我,
STC東莞標檢產品檢測有限公司
手機 13809647918 艾佩女士
電話 0769 81119888ext.8753
郵箱 amy_ai@hkstc.com.cn